membrane bioreactor technology biological reactor in wastewater treatment
2. Advantages of MBR
1). High-quality effluent: MBR technology can produce high-quality treated water that meets stringent regulatory standards for discharge or reuse.
2). Small footprint: MBR systems are compact and require less space compared to conventional wastewater treatment systems. This makes them suitable for installations where space is limited or where land is expensive.
3). Process flexibility: MBR technology can handle variations in wastewater flow and load, making it suitable for both municipal and industrial wastewater treatment applications.
| Item/Model | KH-MBR-8-CO-PVDF | KH-MBR-12-CO-PVDF | KH-MBR-18-CO-PVDF |
| Membrane Area(M2) | 8 | 12 | 18 |
| Height | 1050 mm | 1550 mm | 1800 mm |
| Width | 645 mm | 645mm | 645 mm |
| Thickness | 47 mm | 47mm | 47mm |
| Dry Weight | 6kgs | 10kgs | 15 kgs |
| Membrane material | Reinforced PVDF | Reinforced PVDF | Reinforced PVDF |
| Micro pore size | 0.05μm | 0.05μm | 0.05μm |
| ID/OD of Membrane | 0.9/2.2mm | 0.9/2.2mm | 0.9/2.2mm |
| Suspend solid | <5mg/L | <5mg/L | <5mg/L |
| Temperature | 5-40℃ | 5-40℃ | 5-40℃ |
| PH range | 2~11 | 2~11 | 2~11 |
| Flux for waste water | 15~20 LMH | 15~20 LMH | 15~20 LMH |
| Operating Method | Sucking out 8 mins and staying 2 mins | Sucking out 8 mins and staying 2 mins | Sucking out 8 mins and staying 2 mins |
| Cleaning Chemicals | 500-3000ppm Sodium hypochlorite | 500-3000ppm Sodium hypochlorite | 500-3000ppm Sodium hypochlorite |
3. Technical Parameter of Membrane Module
| Item/Model | KH-MBR-25-CO-PVDF | KH-MBR-30-CO-PVDF | KH-MBR-35-CO-PVDF |
| Membrane Area(M2) | 25 | 30 | 35 |
| Height | 1560 mm | 1810 mm | 1810 mm |
| Width | 1040 mm | 1040 mm | 1250 mm |
| Thickness | 47 mm | 47mm | 35 mm |
| Dry Weight | 20 kgs | 25 kgs | 30 kgs |
| Membrane material | Reinforced PVDF | Reinforced PVDF | Reinforced PVDF |
| Micro pore size | 0.05μm | 0.05μm | 0.05μm |
| ID/OD of Membrane | 0.9/2.2mm | 0.9/2.2mm | 0.9/2.2mm |
| Suspend solid | <5mg/L | <5mg/L | <5mg/L |
| Temperature | 5-40℃ | 5-40℃ | 5-40℃ |
| PH range | 2~11 | 2~11 | 2~11 |
| Flux for waste water | 15~20 LMH | 15~20 LMH | 15~20 LMH |
| Operating Method | Sucking out 8 mins and staying 2 mins | Sucking out 8 mins and staying 2 mins | Sucking out 8 mins and staying 2 mins |
| Cleaning Chemicals | 500-3000ppm Sodium Hypochlorite | 500-3000ppm Sodium Hypochlorite | 500-3000ppm Sodium hypochlorite |
2. Typical parameters of MBR units.
4.. Structure of Membrane Modules and Frames:
A. Structure of MBR Modules
B.Structure of MBR Frames
5. Product Features
-- All the frames are made of SS 304 or SS 316 stainess steel with reliable frames.
-- Every modules can be pulled out or putted in very conveniently for they are installed into UPVC Groove from top to bottom.
-- Every modules have flexible tubes connecting to collecting pipes.
-- Every modules have independent air blowing tube. There are additional air-blowing tube at the bottom of the frames.
-- All the modules have an added patented design air blowing tube to enhance the efficiency of the air blowing onto the membrane surface.
-- Permanent Hydrobility Membrane
-- Strong strength, the broken strength more than 50MPa
-- Excellent performance and Low cost
6. Application of MBR Units:
The whole installation and application process of our MBR modules are described as the following photo:
A. MBR unit of KH-MBRMD-30×28-CO-PVDF with total membrane area of 840 m2/unit.
B. MBR unit of KH-MBRMD-35×60-CO-PVDF with total membrane area of 2100 m2/unit.
Packing & Delivery
Why Choose US?
1). Over 20 years experience in UF and MBR membrane
2). Excellent cooperation partner
3). Own an excellent technical team
4). Advanced R & D capability
5). International management system
6). Located in Jiangsu, convenient export transportation.
Our Service
1). MBR membrane technical consulting,
2). MBR membrane application engineering design,
3). MBR system manufacturing, installation and commissioning,
4). Different membrane dimension, material like pp, PVDF,reinforced PVDF etc.,can be customize according to your requirements
5). 12 months warranty
FAQ
Q: Are you trading company or manufacturer?
A:We are the leading professional manufacturer in China, more than 20 years experience in the waste water treatment.
Q:What about the lead time?
A:Sample needs within 3 days, mass production needs 1-2 weeks after down payment.
Q:Can I have a sample order for UF/MBR Membrane?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q:Is it acceptable to print my logo on UF Membrane product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q:What's the information we need to know?
A1: what's your raw water ?
B1: what's the capacity per hour of the equipment ?
C1: What's the application of purifier water ?
Product Tags:
|
|
47mm Membrane Bioreactor Technology Biological Reactor In Wastewater Treatment Images
|
